Replacement Hose Assemblies from OEM Part Numbers for Saudi Arabia

You can start a hose enquiry with a reference number: the part number printed on the old hose, written in the parts book or shown on an OEM invoice. For machines that are out of warranty or far from a dealer's counter, an aftermarket assembly built to that reference can be a practical alternative. Raipur Hydraulics takes the part number or old tag, confirms what the hose actually is, and quotes an assembly built to that confirmed reference. We do not publish part-number lists; your numbers are used only to confirm your build.

Machine brands you can identify in a request

Buyers in Saudi Arabia can send references from machines such as Caterpillar, Komatsu, Volvo, Liebherr, Hitachi, Sandvik, Epiroc, Doosan, XCMG, SANY, Zoomlion and LiuGong, and from cranes, compressors and plant equipment. The brand names are used only to identify machines.

Aftermarket assemblies built to the confirmed reference. Not OEM-genuine parts; no OEM approval is claimed.

How we confirm a part number

A part number alone is not always enough. The installed configuration can differ with serial range, reference updates or field changes, so the reference and machine details must be reviewed together. We therefore confirm:

1. Hose type and size from the reference, the layline on the old hose, or both
2. End fittings: thread or flange family, seal type, angle and orientation
3. Overall length measured from the agreed reference points for the fitting styles
4. Machine model, serial range and position, so that the assembly fits the machine you actually have
5. Any protection fitted on the original, such as a spiral guard or sleeve

Where the reference and the old hose disagree, we tell you before quoting.

Out-of-warranty and high-hour fleets

For a remote Saudi site, identify the required positions before requesting individual replacements or a planned set. Record the machine model, serial range, old reference and any known modifications. Age or operating hours alone do not establish which hose is required. A contractor or plant can request a position-wise hose kit, built from confirmed references, if it wants several positions quoted together. For hot or sandy locations, the desert-duty guide explains the information needed to review guards, sleeves and cover selection against the actual duty.

What to send

• The part number or numbers, exactly as printed or listed
• Machine make, model and serial number
• Position on the machine, for example "boom cylinder head end, left"
• A photo of the old hose layline and both ends, if available
• Quantity, and whether you also want related positions quoted

You can paste a list into the enquiry form or attach a spreadsheet. Lists are welcome in English or Arabic.

When the part number has been superseded

OEM part numbers change over a machine's life. A number in an older parts book may have been replaced by a newer one, sometimes with a different length or fitting. If your reference looks superseded, we tell you what we found and confirm the build against your machine's serial range and photos before quoting, so the assembly matches the machine in front of you.

Repeat orders

Each assembly leaves Raipur with a traceable tag. Next time, quoting our tag reference is enough to rebuild the same assembly, even if the original part number has since been superseded.